AMAZONE spreader boasts 10,000L capacity

AMAZONE spreader boasts 10,000L capacity

The new AMAZONE ZG-TS boasts a 10,000 litre hopper, a working width of 54 metres (178ft) and an operating speed of up to 30 kilometres an hour.

The new AMAZONE ZG-TS boasts a 10,000 litre hopper, a working width of 54 metres (178ft) and an operating speed of up to 30 kilometres an hour.


IT has a 10,000 litre hopper, a working width of up to 54 metres and an operating speed of up to 30 kilometres an hour.


IT has a 10,000 litre hopper, a working width of up to 54 metres and an operating speed of up to 30 kilometres an hour.

That’s the new AMAZONE ZG-TS 10001 trailed spreader, which CLAAS Harvest Centre says sets new benchmarks for high capacity precision spreading.

It is equipped with a host of cutting-edge technologies, three automatic spreading pattern adjustment systems, automatic calibration, load-dependent electronic braking, hydraulic self-steering and an aperture blockage monitoring system.

CLAAS Harvest Centre product manager (AMAZONE) Craig Hopkins said the ZG-TS delivered a perfect balance between capacity, work rates and precision.

“Theoretically, it is possible to spread 40 kilograms a hectare over 250 hectares in 90 minutes before reloading,” Mr Hopkins said.

The top-of-the-line ProfisPro configuration features an on-board weighing system that automatically regulates the application rate.

“Four weigh cells positioned between the hopper frame and chassis constantly monitor the amount of fertiliser being discharged,” he said.

“This data is used to adjust the metering shutter slides, as well as the intelligent fill-level management system.

“By constantly measuring how much fertiliser remains in the hopper, the weighing system can determine how much fertiliser is required to complete the job.

“This avoids unnecessary travelling in the field with a half-full spreader.”

The ZG-TS 10001 also has the new ArgusTwin and WindControl spreading pattern adjustment systems and FlowCheck aperture blockage monitoring system released at Agritechnica last year.

“ArgusTwin uses 14 radar sensors to monitor the spreading pattern of the left and right spreading discs,” Mr Hopkins said.

“This system automatically adjusts the spreading pattern of either disc if any deviation from the settings is detected, while an additional tilt sensor compensates for sloping terrain.

“A third monitoring system, WindControl, automatically adjusts lateral distribution according to wind speed and direction.”

The ZG-TS 10001 incorporates AMAZONE’s proven TS twin disc spreading system.

“The hydraulically-driven discs ensure constant disc speed, precision and uniformity under all operating conditions,” he said.

“The vane kits can be quickly and simply changed, while the AutoTS system allows the spreader to switch seamlessly from normal to broad spreading without the need to change discs.

“All components are made from stainless steel for a long working life.”

Optional DynamicSpread part-width section control technology offers the possibility to switch up to 128 part-width sections in wedge-shaped fields.

The sharp hopper profile provides sufficient room for the same automatic steering system found on AMAZONE’s UX trailed sprayers.

“The 28 degree pivot angle means the 10001 is capable of true-track steering, even with a track width of 1.8m (6ft) and a tyre width of 520 millimetres (21 inches),” Mr Hopkins said.

“The spreader follows exactly the same path as the tractor and exactly the same path as previous or subsequent spraying operations, minimising crop damage and soil compaction.”

The steering system automatically switches off once the spreading disc drive is deactivated or ground speed exceeds 25km/h.

The steering system, spreading discs and floor belt are powered and controlled via a standard tractor-based, load-sensing hydraulic system or a new hybrid system.

“The latter requires only two-thirds of the oil capacity of the conventional load-sensing system, which allows the use of smaller tractors,” Mr Hopkins said.

“The other third is generated via a PTO-driven hydraulic pump mounted on the spreader itself.”

The hopper design also ensures correct weight distribution across the drawbar and axle.

A double-acting spool valve allows the hopper cover to be quickly rolled back or forth from the tractor cab.

The leaf springs within the canvas ensure the cover stretches tightly over the hopper to provide a weatherproof seal.

The load-dependent electronic braking system permits safe road transport at up to 60km/h.

“The weighing system constantly measures the amount of fertiliser inside the hopper and automatically adjusts the braking force,” Mr Hopkins said.

“The weighing system also has how much load is resting on the axle and how much on the drawbar at any time.

“This avoids subjective misjudgements and ensures legal travel in accordance with road traffic regulations.”

AMAZONE farm machinery is distributed in Australia by the CLAAS Harvest Centre network.

p More information: Craig Hopkins, 03 9369 1188.


From the front page

Sponsored by